AUTOMATIC LIGHT CONTROL SYSTEM
When the light control switch is in the AUTO position, the automatic light control system detects ambient light levels and controls the low beam headlights, clearance lights, taillights and license plate lights.
LIGHT AUTO TURN-OFF SYSTEM
General
The light auto turn-off system is used to prevent the exterior lights from being accidentally left on (headlights, taillights, clearance lights and license plate lights).
When all of the following conditions are met, the headlights, taillights, clearance lights and license plate lights turn off:
The power switch is turned from on (IG) to off.
The headlights, taillights, clearance lights and license plate lights are on.
The driver door is opened.
DAYTIME RUNNING LIGHT SYSTEM
The daytime running light system is designed to automatically illuminate the daytime running lights during the daytime to make the vehicle more visible to other vehicles. This system is controlled by the main body ECU (multiplex network body ECU) and engine room junction block assembly. The main body ECU (multiplex network body ECU) transmits a turn on signal to the engine room junction block assembly, which illuminates the front turn signal light assembly.
This system is enabled when the following conditions are met:
The power switch is on (READY).
The light control switch is in the off or AUTO position (and the taillights are not turned on via the automatic light control system).
The parking brake switch is off.