84140
1.INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY
| *a | Component without harness connected
(Headlight Dimmer Switch Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 13 (T) - 16 (EL) | Light control switch off | 10 kΩ or higher |
| 12 (H) - 16 (EL) | 10 kΩ or higher | |
| 11 (A) - 16 (EL) | 10 kΩ or higher | |
| 13 (T) - 16 (EL) | Light control switch in tail position | Below 1 Ω |
| 13 (T) - 16 (EL) | Light control switch in head position | Below 1 Ω |
| 12 (H) - 16 (EL) | Below 1 Ω | |
| 11 (A) - 16 (EL) | Light control switch in AUTO position | Below 1 Ω |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 17 (HU) - 16 (EL) | Dimmer switch in high position | Below 1 Ω |
| 17 (HU) - 16 (EL) | Dimmer switch in high flasher position | Below 1 Ω |
| 14 (HF) - 16 (EL) | Below 1 Ω |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 20 (TR) - 16 (EL) | Neutral | 10 kΩ or higher |
| 19 (TL) - 16 (EL) | 10 kΩ or higher | |
| 20 (TR) - 16 (EL) | Right turn | Below 1 Ω |
| 19 (TL) - 16 (EL) | Left turn | Below 1 Ω |
If the result is not as specified, replace the headlight dimmer switch assembly.