Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2015.04
RM2040EQ _59 Vehicle Exterior _014738 LIGHTING (EXT) _0075174 AUTOMATIC HIGH BEAM SYSTEM U

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  FAIL-SAFE CHART  


AUTOMATIC HIGH BEAM SYSTEM


a.

The main body ECU (multiplex network body ECU) operates in fail-safe mode if any of the following abnormal conditions is detected.

Item Abnormality Detection Condition Return Condition Multi-information Display
Yaw rate signal malfunction Normal yaw rate signal is not detected. Normal yaw rate signal is detected. "Check Headlight System" is displayed.
Speed sensor signal Malfunction Abnormal speed sensor signal is detected. Normal speed sensor signal is detected. "Check Headlight System" is displayed.
CAN communication signal malfunction Normal CAN communication signal is not detected. Normal CAN communication signal is detected. "Check Headlight System" is displayed.
Lane departure warning camera signal malfunction Normal lane departure warning camera signal is not detected. Normal lane departure warning camera signal is detected. "Check Headlight System" is displayed.