Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › from 2015.04
RM2040EQ _58 Vehicle Interior _014732 INTERIOR PANELS / TRIM _0075129 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  DISASSEMBLY  


PROCEDURE

Hide 81340 1.REMOVE VANITY LIGHT ASSEMBLY

a.

Remove the vanity light assembly.

Click hereVehicle Interior>LIGHTING (INT)>VANITY LIGHT>REMOVAL

HINT:

Use the same procedure for the other vanity light.



Hide 63341 2.REMOVE NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)

a.

Remove the 3 No. 1 roof silencer pads.

B396417


Hide 63342 3.REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)

a.

Remove the No. 2 roof silencer pad.

B396418


Hide 86101J 4.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/o Digital Audio Broadcasting Antenna)

Hide 86101J 5.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (w/ Digital Audio Broadcasting Antenna)

Hide 82171 6.REMOVE NO. 1 ROOF WIRE

a.

Remove the adhesive tape from the roof headlining assembly.

B396460C01
0.333,0.25 0.781,0.583 0.448,0.333 12 false *A 0.344,3 0.833,3.458 0.49,0.458 12 false *B 1,0.667 1.365,0.948 0.365,0.281 12 false *C 1,3.25 1.365,3.531 0.365,0.281 12 false *C
*A w/o Sliding Roof *B w/ Sliding Roof
*C w/ Lane Departure Alert System - -
V100155

Adhesive Tape - -



b.

Turn the visor connectors counterclockwise approximately 45° and separate the connectors from the roof headlining assembly.


c.

Remove the No. 1 roof wire from the roof headlining assembly.

B396403C01
0.333,0.333 0.74,0.698 0.406,0.365 12 false *A 0.354,3 0.667,3.333 0.313,0.333 12 false *B
*A w/o Sliding Roof *B w/ Sliding Roof