When removing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Name Plate or Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, name plates or emblem excessively.
75431
1.REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM
|
Protective Tape |
Apply protective tape around the luggage compartment door emblem as shown in the illustration.
Using a moulding remover, separate the double-sided tape and disengage the 2 pins to remove the luggage compartment door emblem.
Be careful not to damage the vehicle body.
75442
2.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *a | Wooden Block |
| *b | Piano Wire |
|
Protective Tape |
Apply protective tape around the No. 2 luggage compartment door name plate as shown in the illustration.
Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and cut the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 2 luggage compartment door name plate.
75443A
3.REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
| *a | Wooden Block |
| *b | Piano Wire |
|
Protective Tape |
Apply protective tape around the No. 3 luggage compartment door plate as shown in the illustration.
Insert a piano wire between the vehicle body and No. 3 luggage compartment door plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and cut the double-sided tape that holds the No. 3 luggage compartment door plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 3 luggage compartment door plate.
75441A
4.REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *a | Wooden Block |
| *b | Piano Wire |
|
Protective Tape |
Apply protective tape around the No. 1 luggage compartment door name plate as shown in the illustration.
Insert a piano wire between the vehicle body and No. 1 luggage compartment door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and cut the double-sided tape that holds the No. 1 luggage compartment door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 1 luggage compartment door name plate.
75374
5.REMOVE SIDE PANEL EMBLEM (for LH Side)
| *a | Wooden Block |
| *b | Piano Wire |
|
Protective Tape |
Apply protective tape around the side panel emblem as shown in the illustration.
Insert a piano wire between the vehicle body and side panel emblem.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body.
Be careful not to damage the vehicle body.
Remove the side panel emblem.
75374
6.REMOVE SIDE PANEL EMBLEM (for RH Side)
| *a | Wooden Block |
| *b | Piano Wire |
|
Protective Tape |
Apply protective tape around the side panel emblem as shown in the illustration.
Insert a piano wire between the vehicle body and side panel emblem.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body.
Be careful not to damage the vehicle body.
Remove the side panel emblem.