Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2015.04
RM2040EQ _58 Vehicle Interior _014725 METER / GAUGE / DISPLAY _0075073 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning.


v.

Select the setting by referring to the table below.

NOTICE:

Record the current settings before customizing.


Warning
Tester Display Description Default Setting ECU
Key Remind Sound Function to change the frequency of the key reminder warning buzzer Slow 00:Normal,01:Slow,10:Fast Combination meter assembly
Flasher Sound Volume Adjustment Function to change to flasher sound volume Medium 10:Large,00:Medium,01:Small Combination meter assembly
50006 7