Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BODY SIDE PANEL PROTECTOR › from 2015.04
RM2040EQ _59 Vehicle Exterior _014740 EXTERIOR PANELS / TRIM _0168152 REAR BODY SIDE PANEL PROTECTOR A

EXTERIOR PANELS / TRIM  REAR BODY SIDE PANEL PROTECTOR  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75056B 1.REMOVE REAR OUTER PILLAR GARNISH SUB-ASSEMBLY

HINT:

When removing the rear outer pillar garnish sub-assembly, heat the vehicle body and rear outer pillar garnish sub-assembly using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Rear Outer Pillar Garnish Sub-assembly 20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body, rear outer pillar garnish sub-assembly excessively.


a.
B380987C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the rear outer pillar garnish sub-assembly as shown in the illustration.


b.
B401430

Disengage the 6 clips and remove the rear outer pillar garnish sub-assembly.