82641
1.INSPECT NO. 1 INTEGRATION RELAY
| *1 | No. 1 Integration Relay | - | - |
EFI MAIN Relay:
| *1 | No. 1 Integration Relay |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1A-8 - 1B-1 | Auxiliary battery voltage not applied between terminals 1C-7 and 1E-2 | 10 kΩ or higher |
| 1A-8 - 1B-1 | Auxiliary battery voltage applied between terminals 1C-7 and 1E-2 | Below 1 Ω |
| 1C-4 - 1B-1 | ||
| 1C-9 - 1B-1 | ||
| 1C-10 - 1B-1 |
If the result is not as specified, replace the No. 1 integration relay.
EFI MAIN2 Relay:
| *1 | No. 1 Integration Relay |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1A-6 - 1D-1 | Auxiliary battery voltage not applied between terminals 1A-8 and 1E-2 | 10 kΩ or higher |
| 1A-6 - 1D-1 | Auxiliary battery voltage applied between terminals 1A-8 and 1E-2 | Below 1 Ω |
| 1A-7 - 1D-1 | ||
| 1C-6 - 1D-1 |
If the result is not as specified, replace the No. 1 integration relay.
IG2 Relay:
| *1 | No. 1 Integration Relay |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1A-1 - 1D-3 | Auxiliary battery voltage not applied between terminals 1C-8 and 1E-2 | 10 kΩ or higher |
| 1A-1 - 1D-3 | Auxiliary battery voltage applied between terminals 1C-8 and 1E-2 | Below 1 Ω |
| 1A-3 - 1D-3 | ||
| 1C-1 - 1D-3 | ||
| 1C-2 - 1D-3 | ||
| 1C-5 - 1D-3 |
If the result is not as specified, replace the No. 1 integration relay.