Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM › from 2015.04
RM2040EQ _56 Audio / Visual / Telematics _014718 PARK ASSIST / MONITORING _0075025 REAR VIEW MONITOR SYSTEM D

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

To assist the driver with parking the vehicle by displaying an image of the area behind the vehicle, this system has a rear television camera assembly mounted on the luggage compartment door. The system displays the image on the multi-display.


b.

The rear view monitor system consists of the following components:

i.

Rear television camera assembly


ii.

Radio and display receiver assembly


iii.

Engine room junction block assembly


iv.

Power management control ECU




FUNCTION OF COMPONENTS


Item Function
Rear Television Camera Assembly
·

Mounted on the luggage compartment door to transmit an image of the area behind the vehicle to the radio and display receiver assembly.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens.


Radio and Display Receiver Assembly
·

Receives video signals, which contain an image of the area behind the vehicle taken with the rear television camera assembly.

·

Performs control of the system by receiving the reverse signal from the engine room junction block assembly.


Engine Room Junction Block Assembly Transmits a reverse signal to the radio and display receiver assembly.
Power Management Control ECU Transmits a reverse signal to the engine room junction block assembly.


OPERATION EXPLANATION


a.

The radio and display receiver assembly receives the reverse signal when the power switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the radio and display receiver assembly switches to the rear view monitor system.