Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › 2015.04–2016.05
RM2040EQ _58 Vehicle Interior _014730 HEATING / AIR CONDITIONING _0075108 AIR CONDITIONING SYSTEM W

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE AIR CONDITIONING SYSTEM


a.

Customizing with the intelligent tester

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


i.

Connect the intelligent tester.


ii.

Turn the power switch on (IG).


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Body / Air Conditioner / Utility / Customize.


v.

Select the setting by referring to the table below.

Air Conditioner
Tester Display Description Default Setting ECU
Set Temperature Shift Function to perform control with the shifted temperature versus the displayed temperature Normal 00001:-2C,00010:-1C,00100:Normal,01000:+1C,10000:+2C Air Conditioning Amplifier Assembly
Compressor Mode Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off Automatic 0:Automatic,1:Manual Air Conditioning Amplifier Assembly
Air Inlet Mode Function to change the mode automatically to recirculation air mode when turning the air conditioning on to cool the cabin quickly Automatic 0:Automatic,1:Manual Air Conditioning Amplifier Assembly
Foot/DEF Auto Mode Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
Foot/DEF Automatic Blow Up Function Function to increase the blower level automatically when the defroster is ON ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
Ambient Temperature Shift Function to display shifted ambient temperature versus actual ambient temperature Normal 0000001:-3C,0000010:-2C,0000100:-1C,0001000:Normal,0010000:+1C,0100000:+2C,1000000:+3C Air Conditioning Amplifier Assembly
ECO MODE Cancel Function to cancel the ECO mode drive when item is on OFF 0:OFF,1:ON Air Conditioning Amplifier Assembly
Noise and Vibration Reduction Function to change speed of the compressor when item is on OFF 0:OFF,1:ON Air Conditioning Amplifier Assembly
Refrigerant Shortage Check Function to cancel the refrigerant shortage check (check performed during normal operation) when item is OFF ON 0:ON,1:OFF Air Conditioning Amplifier Assembly
Fan speed increment control Function to define how fast the AC blower goes to target speed when first activating the AC Normal 001:Slow,010:Normal,100:Fast Air Conditioning Amplifier Assembly
50006 11


b.

Customizing with the Multi-display (w/ Navigation Receiver Type)

i.

Turn the power switch on (IG).


ii.

Enter the following menus: APPS / Setup / Vehicle / Vehicle customization / Climate settings.


iii.

Select the setting by referring to the table below.

Climate settings
Display Default Content Setting ECU
Auto A/C Mode On Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off On or Off Air Conditioning Amplifier Assembly
Efficient Ventilation Mode On Function to change the mode automatically to recirculation air mode when turning the air conditioning on to cool the cabin quickly On or Off Air Conditioning Amplifier Assembly