Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2015.04
RM2040EQ _56 Audio / Visual / Telematics _014716 AUDIO / VIDEO _0076806 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Disc cannot be Inserted or is Ejected Right After Insertion  


PROCEDURE

1.CHECK IF A PROPER DISC IS INSERTED
a.

Make sure that the disc is an audio CD or a disc with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

OK:

Disc is normal.


HINT:
·

Translucent or uniquely-shaped discs cannot be played.

·

CDs and DVDs with adhesive paper labels should not be played.

·

Commercial audio CDs and DVDs can be played.

·

Disc-DA files on disc-ROMs, disc-Rs and disc-RWs can be played.

·

MP3 and WMA files on disc-ROMs, disc-Rs and disc-RWs can be played.

·

For details on playable CDs and DVDs, refer to the Owner's Manual.




Result:
Proceed to
OK
NG



OK

2.CHECK THAT DISC IS INSERTED PROPERLY

NG

DISC IS FAULTY

2.CHECK THAT DISC IS INSERTED PROPERLY
a.

Check whether the disc is inserted upside down.

OK:

Disc is properly inserted.



Result:
Proceed to
OK
NG



OK

3.CLEAN DISC AND RECHECK

NG

INSERT DISC PROPERLY

3.CLEAN DISC AND RECHECK
a.
I100151

Disc cleaning

i.

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.




Result:
Proceed to
OK
NG



OK

END (DISC WAS DIRTY)

NG

4.REPLACE DISC AND RECHECK
4.REPLACE DISC AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

DISC WAS FAULTY

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY