64719A
1.REMOVE LUGGAGE COMPARTMENT DOOR COVER
76085
2.REMOVE REAR SPOILER SUB-ASSEMBLY
When removing the rear spoiler sub-assembly, heat the vehicle body and rear spoiler sub-assembly using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear Spoiler Sub-assembly | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, rear spoiler sub-assembly excessively.
|
Protective Tape |
Apply protective tape around the rear spoiler sub-assembly as shown in the illustration.
Remove the 2 nuts.
Insert a piano wire between the vehicle body and rear spoiler sub-assembly.
| *a | Wooden Block | *b | Piano Wire |
| *c | Double-sided Tape | *d | Clip |
| *e | Stud Bolt | - | - |
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the rear spoiler sub-assembly to the vehicle body.
Be careful not to damage the vehicle body.
Disengage the 4 clips and remove the rear spoiler sub-assembly.
Remove the 4 clips from the rear spoiler cover.
Remove the 2 gaskets from the rear spoiler cover.
Remove the 2 stud bolts from the rear spoiler cover.