Home › Vehicle Interior › POWER OUTLETS (INT) › WIRELESS CHARGING SYSTEM › from 2016.05
RM2040EQ _58 Vehicle Interior _014731 POWER OUTLETS (INT) _0269992 WIRELESS CHARGING SYSTEM U

POWER OUTLETS (INT)  WIRELESS CHARGING SYSTEM  TERMINALS OF ECU  


MOBILE WIRELESS CHARGER CRADLE ASSEMBLY


E216115N11
3.385,0.146 3.792,0.396 0.406,0.25 3.458,0.188 3.802,0.354 0.344,0.167 10 false I183

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: When the power switch is turned from off to on (ACC), the mobile wireless charger cradle assembly monitors the charging suspension signal for 5 seconds. If the charging suspension signal is not 4 V or more for 0.8 seconds or more during monitoring, the mobile wireless charger cradle assembly determines that there is an open in the charging suspension signal line, blinks (pattern 1) the indicator light (amber), and prohibits operation until the power switch is turned from off to on (ACC) again.

*2: For details about conditions when the certification ECU (smart key ECU assembly) sends the charging suspension signal, refer to System Description.

Click here(Click here)

I183-1 (PGND) - Body ground W-B - Body ground Ground Always Below 1 V
I183-5 (ACC) - I183-1 (PGND) SB - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
Power switch off Below 1 V
I183-6 (B+) - I183-1 (PGND) V - W-B Power source (+B) Power switch off 11 to 14 V
I183-7 (DIS) - Body ground L - Body ground Charging suspension signal For 5 seconds after turning power switch from off to on (ACC)*1 4.5 to 6.0 V
Device being charged Below 1 V
Charging suspended due to smart entry and start system status*2 4.5 to 6.0 V
I183-9 (ILL-) - Body ground BR - Body ground Ground Always Below 1 V
I183-10 (TAIL) - Body ground P - Body ground Illumination signal Light control switch in off position Below 1 V
Power switch off, light control switch in tail or head position 11 to 14 V