RADIATOR LOWER SUPPORT > ASSEMBLY REPLACEMENT
REMOVAL
Symbol meaning
Remove Weld Points
Remove Weld Points
Remove Weld Points
Cut with Disk Sander etc.
INSTALLATION
Symbol meaning
Plug Weld
Plug Weld
Plug Weld
Fillet Weld
INSTALLATION POINT
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.