COWL TOP SIDE UPPER PANEL (for RHD) > ASSEMBLY REPLACEMENT



  1. K101272
    With the cowl top to apron brace removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100022
Cut with Disk Sander etc.

K101275E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  3. After welding the cowl top side panel inner and hood stopper reinforcement to the vehicle side, install the cowl top side panel.
  4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K101276E01