POWER DOOR LOCK CONTROL SYSTEM > DETAILS



FUNCTION
  1. The power door lock control system has the following customizable functions:

    Function
    Outline
    Customizable*1
    One-motion Open (Driver)
    When the door is locked, this function enables the door to be unlocked by merely pulling the inside handle lever of the door.
    Standard (Not Customizable)
    Key-linked Lock
    This function, which is linked with the key cylinder, can lock all the doors when a lock operation is performed.
    Standard (Not Customizable)
    2-step Unlock
    This function is provided to unlock the driver door when the mechanical key is turned in the key cylinder the first time, and to unlock the remaining doors when it is operated (turned) the second time.
    *3
    Manual Unlock Prohibition Function
    When the doors are all closed and are locked using a key linked operation, wireless key operation or entry lock operation, unlocking the vehicle using the door control switch is prohibited.
    *2
    Key Confinement Prevention
    When the electrical key transmitter sub-assembly is present in the interior detection area and a door lock operation is performed while the driver door is open, all the doors will be unlocked.
    Standard (Not Customizable)
    Shift-linked Automatic Door Lock
    When the conditions listed below are met consecutively, this function causes all the doors to be automatically locked.
    1. The power switch is changed from off or on (ACC) to on (IG).
    2. All doors are closed.
    3. The shift lever is moved from P to R, N, D or B.
    4. Any one of the doors is in an unlocked state.
    *3
    Speed-sensitive Automatic Door Lock
    When the conditions listed below are met, this function causes all the doors to be automatically locked.
    1. Vehicle speed is higher than approximately 20 km/h (12 mph).
    2. All doors are closed.
    3. Any one of the doors is in an unlocked state.
    *2
    Shift-linked Automatic Door Unlock
    When the power switch is turned on (IG), and the shift lever is moved to P, all the doors will be automatically unlocked.
    *3
    Driver Door Opening-linked Automatic Door Unlock
    All doors are automatically unlocked when the driver door is opened within 10 seconds after the power switch is changed from on (IG) to on (ACC) or off.
    *3

    1. *1: The customizable functions can be turned on or off using the customized body electronics system. For details, refer to the Repair Manual.
    2. *2: Default setting is on.
    3. *3: Default setting is off.