METER / GAUGE SYSTEM > DETAILS



OPERATING CONDITION
  1. Hybrid System Indicator Operation

    1. The hybrid system indicator will begin to operate when both of the following conditions are met:

      1. The hybrid system is operating (the READY indicator light is illuminated).
      2. The shift position is not in P, R or N.


FUNCTION
  1. Combination Meter Assembly

    1. Buzzer Function

      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

      1
      READY
      2
      Seat Belt Warning (Level 2)
      3
      Seat Belt Warning (Level 1)
      4
      Brake Force Reduction Warning
      5
      EPS Warning
      6
      Smart Entry and Start System Warning (Continuous)
      7
      Smart Entry and Start System Warning 1 (Intermittent)
      8
      Brake System Temperature Rise or Active Test
      9
      Smart Entry and Start System Warning 2 (Intermittent)
      10
      Smart Entry and Start System Warning (Once)
      11
      Multi-information Display Warning
      12
      Accelerator Depression in N Position
      13
      Hybrid System Warning (Intermittent)
      14
      Hybrid Battery Low Warning (SOC: 25% or less)
      15
      Hybrid System Warning (Once)
      16
      Hybrid Battery Low Warning (SOC: 18% or less)
      17
      Immobiliser Certification Reminder
      18
      Shift Position P Request
      19
      Parking Brake Engaged Warning
      20
      Door Open while Driving Warning
      21
      EV Mode Reject Warning
      22
      Slide Roof Warning*
      23
      Turn Signal/Hazard Warning Operation
      -
      -
      1. *: Models with sliding roof system



  2. Multi-information Display

    1. Display Function Flow


      1. The multi-information display can be switched as shown in the flow chart below:


        Y171665E02


        No.
        Display Change Condition
        *a
        Conditions are met.
        *b
        Conditions are not met.
        *c
        If there are multiple display requests, items will be displayed in sequence.
        *d
        An item or display is selected by operating the steering pad switch assembly.
        *e
        After power switch on (IG).
        *f
        The Eco Drive Level display is displayed for a certain period of time after the power switch is turned off.



    2. Information Display Tab Operation

      1. The information currently displayed can be switched using the RIGHT (PAGE) switch of the steering pad switch assembly.

      Y172241E01


      Text in Illustration 
      *1
      Steering Pad Switch Assembly
      *2
      RIGHT (PAGE) Switch
      *3
      Drive Information
      *4
      Warning Message
      *5
      Settings
      -
      -
      *a
      The illustrations shown are examples only.
      -
      -
      V100136
      RIGHT (PAGE) switch operation
      -
      -

    3. Drive Information Mode Function

      1. The drive information tab shows vehicle information such as drivable range and fuel consumption.

      2. The drive information display can be changed by using the UP/DOWN switch of the steering pad switch assembly.


        Y171796E01


        Text in Illustration 
        *1
        Steering Pad Switch Assembly
        *2
        UP Switch
        *3
        DOWN Switch
        *4
        Drive Information 1
        *5
        Drive Information 2
        *6
        Drive Information 3
        *7
        Energy Monitor
        *8
        Blank
        *a
        The illustrations shown are examples only.
        -
        -
        V100136
        UP switch operation
        V100135
        DOWN switch operation

    4. Eco Drive Level

      1. The eco drive level changes among 5 levels to indicate the average fuel consumption.
      2. After the power switch is turned off, the eco drive level display appears for 3 seconds in the multi-information display. When the average fuel consumption is 5.6 L/100 km or less or 18 km/L or higher, the "EXCELLENT!" message flashes.

        Average Fuel Consumption Level
        Multi-information Display (L/100 km)
        Multi-information Display (km/L)
        Level 0
        (9 L/100 km or higher, or 5 km/L or less)
        Y173924
        Y150846
        Level 1
        (8 to 9 L/100 km, or 5 to 7.5 km/L)
        Y173925
        Y150847
        Level 2
        (7 to 8 L/100 km, or 7.5 to 10 km/L)
        Y173926
        Y150848
        Level 3
        (6 to 7 L/100 km, or 10 to 12.5 km/L)
        Y173927
        Y150849
        Level 4
        (5 to 6 L/100 km, or 12.5 to 15 km/L)
        Y173928
        Y150850
        Level 5
        (5 L/100 km or less, or 15 km/L or higher)
        Y150844
        Y150851
        EXCELLENT!
        (5.6 L/100 km or less, or 18 km/L or higher)
        Y173930
        Y150852

    5. Setting Function

      1. The items displayed on the multi-information display can be customized.
      2. The following items can be selected on the information setting screen.

      Item
      Available Setting
      Language
      The language used on the multi-information display can be selected:
      1. English (Default)
      2. French
      3. Spanish
      Unit
      The unit displayed on the multi-information display can be selected:
      1. km (L/100 km) (Default)
      2. km (km/L)
      Drive Information 3
      2 items can be selected among the following:
      1. Total Average Vehicle Speed between Reset Operations (Default of lower area)
      2. Average Vehicle Speed after Engine Start-up
      3. Total Elapsed Time between Reset Operations
      4. Elapsed Time after Engine Start-up
      5. Cruising Range (Default of upper area)
      6. Cruising Range after Engine Start-up
      7. Total Cruising Range between Reset Operations
      8. Blank
      EV Driving Indicator Light
      The EV Driving Indicator Light can be switched:
      1. ON (Default)
      2. OFF
      Interruption Display
      The following displays that appear as soon as the set conditions are met can be switched to ON (default) or OFF:
      1. Incoming Telephone Display
      2. Rheostat
      Accent Color
      The accent color can be changed:
      1. Clear Blue (Default)
      2. Clear Turquoise
      3. Deep Orange
      4. Radiant Orange
      Initialization
      The set items can be initialized.

    6. Warning Mode Function

      1. When a warning is necessary, the warning display interrupts the current display on the multi-information display.
      2. The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

      Priority
      Display
      Master Warning Light
      Buzzer
      1
      Maintenance Mode
      -
      -
      Certification Mode
      -
      -
      2
      Shift to P position when parked
      Blinks
      Sounds
      3
      Door open (while driving) (image display)*1
      Blinks
      Sounds
      Door open (image display)
      -
      -
      Clearance sonar detection (image display)
      -
      -
      Check Park Sonar System
      Illuminates
      -
      Clean Park Sonar
      Illuminates
      -
      4
      Auto Power OFF to Conserve Battery
      -
      -
      5
      N position
      Blinks
      Sounds
      Traction battery preservation mode
      Restart after shifting to P position
      Blinks
      Sounds
      Check Hybrid System
      Stop the vehicle in a safe place immediately
      Illuminates
      Sounds
      6
      Traction battery Low
      Charges when not in N position
      Blinks
      Sounds
      Release Parking Brake
      Blinks
      Sounds
      Key not detected
      Blinks
      Sounds
      7
      Charging System Malfunction
      See Owner's Manual
      -
      -
      Check Entry & Start System
      Blinks
      Sounds
      Check Cruise Control System
      Illuminates
      Sounds
      Engine Oil Pressure Low
      Illuminates
      Sounds
      8
      Turn Power OFF
      Blinks
      Sounds
      Key detected in vehicle
      Blinks
      Sounds
      Moon Roof opened*2
      Blinks
      Sounds
      Depress brake pedal, touch POWER switch with key
      Blinks
      Sounds
      Depress brake pedal and push POWER switch to start
      Blinks
      Sounds
      Shift to P position to start
      Blinks
      Sounds
      9
      Steering Lock active
      Blinks
      Sounds
      Shift to P position to start
      Blinks
      Sounds
      10
      Key Battery Low
      Illuminates
      Sounds
      Check Headlight System
      Illuminates
      Sounds
      Hybrid System Overheat
      Output Power is limited
      Illuminates
      Sounds
      11
      Driving force Limited
      -
      -
      Low 12-volt Battery
      See Owner's Manual
      -
      -
      Washer Fluid Low
      -
      -
      Fuel Low
      -
      -
      TRC OFF
      -
      -
      Power ON
      -
      -
      Depress brake pedal and push POWER switch to start
      -
      -
      EV mode currently not available
      -
      Sounds
      EV mode not available
      Warming up
      -
      Sounds
      EV mode currently not available
      Low battery
      -
      Sounds
      EV mode currently not available
      Excessive speed
      -
      Sounds
      EV mode currently not available
      Excessive acceleration
      -
      Sounds
      EV mode deactivated
      -
      Sounds
      EV mode deactivated
      Low battery
      -
      Sounds
      EV mode deactivated
      Excessive speed
      -
      Sounds
      EV mode deactivated
      Excessive acceleration
      -
      Sounds
      1. *1: If the vehicle has reached a speed of 5 km/h (3 mph)
      2. *2: Models with sliding roof system