METER / GAUGE SYSTEM > DETAILS |
| OPERATING CONDITION |
Hybrid System Indicator Operation
The hybrid system indicator will begin to operate when both of the following conditions are met:
| FUNCTION |
Combination Meter Assembly
Buzzer Function
| 1 | READY | 2 | Seat Belt Warning (Level 2) |
| 3 | Seat Belt Warning (Level 1) | 4 | Brake Force Reduction Warning |
| 5 | EPS Warning | 6 | Smart Entry and Start System Warning (Continuous) |
| 7 | Smart Entry and Start System Warning 1 (Intermittent) | 8 | Brake System Temperature Rise or Active Test |
| 9 | Smart Entry and Start System Warning 2 (Intermittent) | 10 | Smart Entry and Start System Warning (Once) |
| 11 | Multi-information Display Warning | 12 | Accelerator Depression in N Position |
| 13 | Hybrid System Warning (Intermittent) | 14 | Hybrid Battery Low Warning (SOC: 25% or less) |
| 15 | Hybrid System Warning (Once) | 16 | Hybrid Battery Low Warning (SOC: 18% or less) |
| 17 | Immobiliser Certification Reminder | 18 | Shift Position P Request |
| 19 | Parking Brake Engaged Warning | 20 | Door Open while Driving Warning |
| 21 | EV Mode Reject Warning | 22 | Slide Roof Warning* |
| 23 | Turn Signal/Hazard Warning Operation | - | - |
Multi-information Display
Display Function Flow

| No. | Display Change Condition |
| *a | Conditions are met. |
| *b | Conditions are not met. |
| *c | If there are multiple display requests, items will be displayed in sequence. |
| *d | An item or display is selected by operating the steering pad switch assembly. |
| *e | After power switch on (IG). |
| *f | The Eco Drive Level display is displayed for a certain period of time after the power switch is turned off. |
Information Display Tab Operation

| *1 | Steering Pad Switch Assembly | *2 | RIGHT (PAGE) Switch |
| *3 | Drive Information | *4 | Warning Message |
| *5 | Settings | - | - |
| *a | The illustrations shown are examples only. | - | - |
![]() | RIGHT (PAGE) switch operation | - | - |
Drive Information Mode Function

| *1 | Steering Pad Switch Assembly | *2 | UP Switch |
| *3 | DOWN Switch | *4 | Drive Information 1 |
| *5 | Drive Information 2 | *6 | Drive Information 3 |
| *7 | Energy Monitor | *8 | Blank |
| *a | The illustrations shown are examples only. | - | - |
![]() | UP switch operation | ![]() | DOWN switch operation |
Eco Drive Level
| Average Fuel Consumption Level | Multi-information Display (L/100 km) | Multi-information Display (km/L) |
| Level 0 (9 L/100 km or higher, or 5 km/L or less) | ![]() | ![]() |
| Level 1 (8 to 9 L/100 km, or 5 to 7.5 km/L) | ![]() | ![]() |
| Level 2 (7 to 8 L/100 km, or 7.5 to 10 km/L) | ![]() | ![]() |
| Level 3 (6 to 7 L/100 km, or 10 to 12.5 km/L) | ![]() | ![]() |
| Level 4 (5 to 6 L/100 km, or 12.5 to 15 km/L) | ![]() | ![]() |
| Level 5 (5 L/100 km or less, or 15 km/L or higher) | ![]() | ![]() |
| EXCELLENT! (5.6 L/100 km or less, or 18 km/L or higher) | ![]() | ![]() |
Setting Function
| Item | Available Setting |
| Language | The language used on the multi-information display can be selected:
|
| Unit | The unit displayed on the multi-information display can be selected:
|
| Drive Information 3 | 2 items can be selected among the following:
|
| EV Driving Indicator Light | The EV Driving Indicator Light can be switched:
|
| Interruption Display | The following displays that appear as soon as the set conditions are met can be switched to ON (default) or OFF:
|
| Accent Color | The accent color can be changed:
|
| Initialization | The set items can be initialized. |
Warning Mode Function
| Priority | Display | Master Warning Light | Buzzer |
| 1 | Maintenance Mode | - | - |
| Certification Mode | - | - | |
| 2 | Shift to P position when parked | Blinks | Sounds |
| 3 | Door open (while driving) (image display)*1 | Blinks | Sounds |
| Door open (image display) | - | - | |
| Clearance sonar detection (image display) | - | - | |
| Check Park Sonar System | Illuminates | - | |
| Clean Park Sonar | Illuminates | - | |
| 4 | Auto Power OFF to Conserve Battery | - | - |
| 5 | N position | Blinks | Sounds |
| Traction battery preservation mode Restart after shifting to P position | Blinks | Sounds | |
| Check Hybrid System Stop the vehicle in a safe place immediately | Illuminates | Sounds | |
| 6 | Traction battery Low Charges when not in N position | Blinks | Sounds |
| Release Parking Brake | Blinks | Sounds | |
| Key not detected | Blinks | Sounds | |
| 7 | Charging System Malfunction See Owner's Manual | - | - |
| Check Entry & Start System | Blinks | Sounds | |
| Check Cruise Control System | Illuminates | Sounds | |
| Engine Oil Pressure Low | Illuminates | Sounds | |
| 8 | Turn Power OFF | Blinks | Sounds |
| Key detected in vehicle | Blinks | Sounds | |
| Moon Roof opened*2 | Blinks | Sounds | |
| Depress brake pedal, touch POWER switch with key | Blinks | Sounds | |
| Depress brake pedal and push POWER switch to start | Blinks | Sounds | |
| Shift to P position to start | Blinks | Sounds | |
| 9 | Steering Lock active | Blinks | Sounds |
| Shift to P position to start | Blinks | Sounds | |
| 10 | Key Battery Low | Illuminates | Sounds |
| Check Headlight System | Illuminates | Sounds | |
| Hybrid System Overheat Output Power is limited | Illuminates | Sounds | |
| 11 | Driving force Limited | - | - |
| Maintenance Required for Hybrid Battery Cooling Parts at Your Dealer | - | - | |
| Low 12-volt Battery See Owner's Manual | - | - | |
| Washer Fluid Low | - | - | |
| Fuel Low | - | - | |
| TRC OFF | - | - | |
| Power ON | - | - | |
| Depress brake pedal and push POWER switch to start | - | - | |
| EV mode currently not available | - | Sounds | |
| EV mode not available Warming up | - | Sounds | |
| EV mode currently not available Low battery | - | Sounds | |
| EV mode currently not available Excessive speed | - | Sounds | |
| EV mode currently not available Excessive acceleration | - | Sounds | |
| EV mode deactivated | - | Sounds | |
| EV mode deactivated Low battery | - | Sounds | |
| EV mode deactivated Excessive speed | - | Sounds | |
| EV mode deactivated Excessive acceleration | - | Sounds |