FEATURES > PERFORMANCE



OUTLINE


  1. TOYOTA Hybrid System-II (THS-II)



    1. This system optimally performs cooperative control of the 2AR-FXE engine, and Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2) in the P314 hybrid vehicle transaxle assembly that provides excellent transmission performance. Furthermore, this system uses a high-output HV battery with a nominal voltage of DC 244.8 V, and a variable-voltage system in which a boost converter boosts the operating voltage of the system to a maximum voltage of DC 650 V.


      V101859E01


      Text in Illustration 
      *1
      2AR-FXE Engine
      *2
      Inverter with Converter Assembly
      *3
      P314 Hybrid Vehicle Transaxle Assembly
      *4
      HV Battery Assembly

      System Performance 
      Maximum System Output*
      kW
      151
      *: Maximum system output is engine output and MG2 output controlled by THS-II. MG2 output depends on power supplied by the HV battery.



  2. 2AR-FXE Engine

    1. The 2AR-FXE is an in-line 4-cylinder, 2.5-liter, 16-valve DOHC engine.



    2. The 2AR-FXE engine is an in-line 4-cylinder, 2.5 liter, 16 valve DOHC engine. This engine uses the Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system*. These control functions achieve improved engine performance, fuel economy, and clean emissions.
      *: Models with EGR control


      W105585E01


      Text in Illustration 
      *A
      Models without EGR Control
      -
      -

      W105426E01


      Text in Illustration 
      *A
      Models with EGR Control
      -
      -

      Item
      Specification
      No. of Cyls. & Arrangement
      4-cylinder, In-line
      Valve Mechanism
      16-valve, DOHC with VVT-i
      Fuel System
      SFI
      Displacement
      cm3 (cu. in.)
      2494 (152.2)
      Max. Output (EEC)
      kW@rpm
      118@5700
      Max. Torque (EEC)
      N*m@rpm
      213@4500



  3. P314 Hybrid Vehicle Transaxle Assembly



    1. The P314 hybrid vehicle transaxle assembly contains Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2).


      V101857E01


      Text in Illustration 
      *1
      Motor Generator No. 1 (MG1)
      *2
      Motor Generator No. 2 (MG2)

      Item
      Specification
      Motor Generator No. 1 (MG1)
      Motor Generator No. 2 (MG2)
      Type
      Permanent Magnet Motor
      Permanent Magnet Motor
      Function
      Generate, Engine Starter
      Generate, Drive Wheels
      Cooling System
      Water-cooled
      Water-cooled
      Maximum Output
      kW
      -
      105
      Maximum Torque
      N*m
      -
      270



  4. Suspension

    1. A MacPherson strut type independent suspension is used for the front.



    2. A dual link MacPherson strut type independent suspension is used for the rear.


      V101862



  5. Steering



    1. The Electric Power Steering (EPS) system uses a power steering motor, a power steering torque sensor and a reduction mechanism that are built into the steering column assembly to generate assist torque, in order to assist the driver's steering effort.


      V101917E01


      Text in Illustration 
      *1
      Steering Gear Assembly
      *2
      Steering Column Assembly

  6. Brake

    Item
    Specification
    Front Brake
    Type
    Ventilated Disc
    Rotor Size (D x T)*
    mm (in.)
    296 x 28 (11.65 x 1.10)
    Rear Brake
    Type
    Solid Disc
    Rotor Size (D x T)*
    mm (in.)
    281 x 10 (11.06 x 0.39)
    Brake Control System
    ABS with EBD, Brake Assist, TRC, VSC+ and Hill-start Assist Control
    *: Diameter x Thickness