METER / GAUGE SYSTEM > GENERAL |
| OUTLINE |
Combination Meter Assembly
An Optitron type combination meter assembly is provided.
The combination meter assembly has a built-in meter ECU and buzzer.
The 2 Liquid Crystal Display (LCD) are provided for the combination meter assembly.
The combination meter assembly has a multi-information display.

| *1 | Rheostat Switch | *2 | LCD |
| *3 | Multi-information Display | *4 | ODO/TRIP Switch |
| MAIN FEATURES |
Combination Meter Assembly
An illumination control which allows for anticipation of a pleasant drive is used. If the power switch is turned on (IG), the illumination control operates as follows:

![]() | Power switch off to ON | ![]() | Power switch ON to off |
Hybrid System Indicator
The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output.
The scale for the Hybrid System Indicator is divided into 3 areas (Charge, Eco, Power). The role of each area is as follows.
| Area | Function |
| Charge | The Charge area indicates when energy regeneration is occurring. |
| Eco |
|
| Power | The Power area indicates that the Eco-friendly driving range is being exceeded (during full power driving etc.). |

| *1 | Charge Area | *2 | Hybrid Eco Area |
| *3 | Eco Area | *4 | Power Area |
Fuel Consumption Gauge
A needle indicator type average fuel consumption gauge is provided on the combination meter assembly. The needle indicator indicates the value in accordance with the average fuel consumption value displayed on the multi-information display.
An instantaneous fuel consumption gauge is provided. This gauge is a segment type indicator and is arranged outside the average fuel consumption gauge. This arrangement enables the driver to check the average and instantaneous fuel consumption simultaneously, assisting eco-friendly driving.

| *1 | Average Fuel Consumption Gauge | *2 | Instantaneous Fuel Consumption Gauge |
LCD
2 LCDs are provided in the combination meter assembly. Each display shows the following information.
| Item | Outline |
| LCD (Hybrid System Indicator Side) |
|
| LCD (Fuel Gauge Side) |
|
Multi-information Display
The multi-information display shows the following information.
| Mode | Outline |
| Cruise Information |
|
| Clearance Sonar Display* | The obstruction detection state of the clearance sonars is displayed. |
| Warning | The warning display will interrupt the multi-information display immediately when a warning occurs. |
| Customization |
|