METER / GAUGE SYSTEM > GENERAL



OUTLINE


  1. Combination Meter Assembly

    1. An Optitron type combination meter assembly is provided.

    2. The combination meter assembly has a built-in meter ECU and buzzer.

    3. The 2 Liquid Crystal Display (LCD) are provided for the combination meter assembly.



    4. The combination meter assembly has a multi-information display.


      Y129561E01


      Text in Illustration 
      *1
      Rheostat Switch
      *2
      LCD
      *3
      Multi-information Display
      *4
      ODO/TRIP Switch


MAJOR DIFFERENCE
  1. The new models have been modified from the previous models as shown below:

    1. Due to the addition of the VSC OFF function, the following indicators have been added:
      - TRC OFF Indicator Light
      - VSC OFF Indicator Light

    2. A washer fluid level warning has been added to the warning mode function of the multi-information display.


MAIN FEATURES
  1. Combination Meter Assembly

    1. An illumination control which allows for anticipation of a pleasant drive is used. If the power switch is turned on (IG), the illumination control operates as follows:

      1. When the power switch is turned on (IG), the opening display appears on the multi-information display.
      2. The following illuminations fade in: the speedometer, Hybrid System Indicator, fuel gauge, fuel consumption meter needle indicator, 2 LCD displays and meter panel illumination.

      3. When the power switch is turned off, all the illuminations fade out. During this period, the multi-information display shows the Eco drive level for 3 seconds.


        Y129562


        Text in Illustration 
        V100136
        Power switch off to ON
        V100135
        Power switch ON to off



  2. Hybrid System Indicator

    1. The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output.



    2. The scale for the Hybrid System Indicator is divided into 3 areas (Charge, Eco, Power). The role of each area is as follows.

      Area
      Function
      Charge
      The Charge area indicates when energy regeneration is occurring.
      Eco
      1. The Eco area indicates when the vehicle is being driven Eco-friendly.
      2. The Hybrid Eco area indicates that the vehicle is driven in a manner that promotes frequent motor only operation. (Based on various conditions, the power management ECU controls if the engine should be stopped to enhance fuel efficiency.)
      Power
      The Power area indicates that the Eco-friendly driving range is being exceeded (during full power driving etc.).


      Y113376E01


      Text in Illustration 
      *1
      Charge Area
      *2
      Hybrid Eco Area
      *3
      Eco Area
      *4
      Power Area



  3. Fuel Consumption Gauge

    1. A needle indicator type average fuel consumption gauge is provided on the combination meter assembly. The needle indicator indicates the value in accordance with the average fuel consumption value displayed on the multi-information display.



    2. An instantaneous fuel consumption gauge is provided. This gauge is a segment type indicator and is arranged outside the average fuel consumption gauge. This arrangement enables the driver to check the average and instantaneous fuel consumption simultaneously, assisting eco-friendly driving.


      Y113377E01


      Text in Illustration 
      *1
      Average Fuel Consumption Gauge
      *2
      Instantaneous Fuel Consumption Gauge

  4. LCD

    1. 2 LCDs are provided in the combination meter assembly. Each display shows the following information.

      Item
      Outline
      LCD (Hybrid System Indicator Side)
      1. The following information items are always displayed.
        1. Shift Position Indicator
        2. Engine Coolant Temperature Gauge (segment type display)
        3. Ambient Temperature
      2. When the rheostat switch is pressed, the engine coolant temperature gauge will change into meter illumination adjustment mode. The meter illumination can be switched between 6 levels.
      LCD (Fuel Gauge Side)
      1. The following information items can be displayed. The item shown can change by pressing the ODO/TRIP switch.
        1. Odometer
        2. Trip Meter A
        3. Trip Meter B

  5. Multi-information Display

    1. The multi-information display shows the following information.

      Mode
      Outline
      Cruise Information
      1. The item shown can be changed by pushing the DISP switch in the steering pad switch assembly.
      2. In cruise information mode, the following information can be displayed:
        1. Cruising Range and Average Fuel Consumption
        2. Average Vehicle Speed and Elapsed Time
        3. Eco Drive Level
        4. Energy Monitor
        5. Settings
        6. Blank Screen
      Clearance Sonar Display*
      The obstruction detection state of the clearance sonars is displayed.
      Warning
      The warning display will interrupt the multi-information display immediately when a warning occurs.
      Customization
      1. The following display, performance or illumination of the combination meter assembly can be customized:
        1. Language
        2. Instantaneous Fuel Consumption Gauge
        3. EV Drive Indicator Light

      1. *: Models with TOYOTA parking assist-sensor system