Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > REMOVAL

for Preparation Click here



1. REMOVE FRONT ROCKER PANEL MOULDING END COVER


    B282067
  1. Remove the 2 screws and front rocker panel moulding end cover.



2. REMOVE ROCKER PANEL MOULDING ASSEMBLY


  1. Put protective tape around the rocker panel moulding assembly and door.


    B280022E01


    Text in Illustration 
    *1
    Protective Tape
    -
    -



    B282069
  1. Remove the 2 screws and grommet.



    B282070
  1. Remove the screw.



    B282071
  1. Remove the 7 clips.



    B282072
  1. Remove the screw.



    B282073
  1. Disengage the 10 clips and remove the rocker panel moulding assembly.

  1. Remove the 10 clips from the rocker panel moulding assembly.