Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



DESCRIPTION
The power management control ECU controls the cruise control system of the vehicle. The data and DTCs relating to the cruise control system can be read from the DLC3 of the vehicle. Use the intelligent tester to check and solve the problem.

HINT:
If a vehicle speed sensors, stop light switch assembly or any other related part malfunctions, the power management control ECU cancels cruise control operation automatically.


CHECK DLC3
  1. Check the DLC3 (Click here).


CHECK INDICATOR


    E237994E01
  1. Turn the power switch on (IG).
    Text in Illustration 
    *1
    Multi-information Display
    *2
    Cruise Control Indicator Light

  2. Check that the cruise control indicator light illuminates when the cruise control system is turned on using the cruise control switch (ON-OFF button), and that the indicator light turns off when the cruise control system is turned off using the cruise control switch (ON-OFF button). If the results are not as specified, perform the Cruise Main Indicator Light Circuit inspection procedure (Click here).

    HINT:
    While driving with the cruise control system controlling vehicle speed, the power management control ECU will automatically cancel cruise control system control of vehicle speed when a malfunction occurs in one of the following: vehicle speed sensors, stop light switch assembly, or other related parts. When control of vehicle speed by the cruise control system is automatically canceled, the cruise control indicator light goes out and a warning message is displayed. At the same time, a DTC is stored.