Home › Engine / Hybrid System › 2AR-FXE INTAKE / EXHAUST › EXHAUST PIPE

EXHAUST PIPE > REMOVAL

for Preparation Click here



1. REMOVE HEATED OXYGEN SENSOR


    A259044
  1. Disconnect the heated oxygen sensor connector.



    A255133E01
  1. Using SST, remove the heated oxygen sensor from the front exhaust pipe.

    SST
    09224-00010  



2. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    A261041
  1. Remove the 2 bolts and 2 compression springs.

  1. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

  1. Remove the gasket from the center exhaust pipe assembly.



3. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    A254706
  1. Remove the 2 nuts.

  1. Remove the center exhaust pipe assembly from the exhaust pipe support.

  1. Remove the gasket from the front exhaust pipe assembly.



4. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    A258964
  1. Remove the 2 bolts and 2 compression springs.

  1. Remove the front exhaust pipe assembly from the exhaust pipe support.

  1. Remove the gasket from the exhaust manifold converter sub-assembly.



5. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY


    A261042
  1. Remove the tail exhaust pipe baffle sub-assembly from the tail exhaust pipe assembly.