Home › Engine / Hybrid System › 2AR-FXE COOLING › WATER PUMP

WATER PUMP > REMOVAL

for Preparation Click here



1. DRAIN COOLANT (for Engine)

NOTICE:
Do not remove the radiator cap sub-assembly or radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

  1. Loosen the radiator drain cock plug.



  1. Remove the radiator cap sub-assembly.


    A259346E01


    Text in Illustration 
    *1
    Radiator Cap Sub-assembly
    *2
    Radiator Drain Cock Plug

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



2. REMOVE ENGINE WATER PUMP ASSEMBLY


    A259412
  1. Disconnect the clamp.



    A259347
  1. Disconnect the connector from the engine water pump assembly.



    A259348
  1. Remove the 5 bolts and engine water pump assembly.



    A260204
  1. Remove the gasket from the engine water pump assembly.