Home › Engine / Hybrid System › 2AR-FXE COOLING › THERMOSTAT

THERMOSTAT > REMOVAL

for Preparation Click here



1. DRAIN COOLANT (for Engine)

NOTICE:
Do not remove the radiator cap sub-assembly or radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

  1. Loosen the radiator drain cock plug.



  1. Remove the radiator cap sub-assembly.


    A259346E01


    Text in Illustration 
    *1
    Radiator Cap Sub-assembly
    *2
    Radiator Drain Cock Plug

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



2. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    A260233
  1. Remove the engine oil level dipstick.

  1. Remove the bolt and engine oil level dipstick guide.

  1. Remove the O-ring from the engine oil level dipstick guide.



3. DISCONNECT NO. 2 RADIATOR HOSE


    A260222
  1. Disconnect the No. 2 radiator hose.



4. DISCONNECT NO. 6 WATER BY-PASS HOSE


    A259350
  1. Disconnect the No. 6 water by-pass hose.



5. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY


    A259351
  1. Remove the 2 bolts and water inlet with thermostat sub-assembly.



    A259352
  1. Remove the gasket from the water inlet with thermostat sub-assembly.