TOYOTA PARKING ASSIST-SENSOR SYSTEM > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the clearance sonar main switch on.
Turn the intelligent tester on.
Enter the following menus: Body / Clearance Sonar / DTC.
Check for DTCs (Click here).
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the clearance sonar main switch on.
Turn the intelligent tester on.
Enter the following menus: Body / Clearance Sonar / DTC.
Clear the DTCs.