Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR

FRONT WIPER MOTOR > INSPECTION

for Preparation Click here


CAUTION:
Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.



1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)


E144461E74
  1. Check low speed operation.

    1. Connect a auxiliary battery positive (+) lead to terminal B1-5 (+1) and a negative (-) lead to terminal B1-4 (E) and check that the motor operates at low speed.

      OK:
      Motor operates at low speed.

  1. Check high speed operation.

    1. Connect a auxiliary battery positive (+) lead to terminal B1-3 (+2) and a negative (-) lead to terminal B1-4 (E) and check that the motor operates at high speed.

      OK:
      Motor operates at high speed.

      Text in Illustration 
      *a
      Component without harness connected
      (Windshield Wiper Motor Assembly)
      If the result is not as specified, replace the windshield wiper motor assembly.



2. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)


E144461E67
  1. Check low speed operation.

    1. Connect a auxiliary battery positive (+) lead to terminal B1-1 (+1) and a negative (-) lead to terminal B1-5 (E), and check that the motor operates at low speed.

      OK:
      Motor operates at low speed.

  1. Check high speed operation.

    1. Connect a auxiliary battery positive (+) lead to terminal B1-4 (+2) and a negative (-) lead to terminal B1-5 (E), and check that the motor operates at high speed.

      OK:
      Motor operates at high speed.

      Text in Illustration 
      *a
      Component without harness connected
      (Windshield Wiper Motor Assembly)
      If the result is not as specified, replace the windshield wiper motor assembly.