FRONT AIRBAG SENSOR > ON-VEHICLE INSPECTION |
| 1. INSPECT FRONT AIRBAG SENSOR (for Vehicle not Involved in Collision) |
Perform a diagnostic system check.
for Separate Type Yaw Rate Sensor: (Click here)
for Built-in Type Yaw Rate Sensor: (Click here)
| 2. INSPECT FRONT AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed) |
Perform a diagnostic system check.
for Separate Type Yaw Rate Sensor: (Click here)
for Built-in Type Yaw Rate Sensor: (Click here)
Visually check the front airbag sensors for defects if the front bumper of the vehicle or the area around the bumper is damaged.
| 3. INSPECT FRONT AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag is Deployed) |
When airbags have deployed as the result of a collision, be sure to replace all front airbag sensors in the damaged areas (anywhere in need of repair).
Visually check the front airbag sensors in undamaged areas for defects.