Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM

DTC    P06B0-163    Sensor Power Supply "A" Circuit / Open

DTC    P06D6-511    Sensor Reference Voltage "F" Circuit / Open

DTC    P06E6-164    Sensor Power Supply "C" Circuit / Open

DTC    P0A1A-151    Generator Control Module

DTC    P0A1A-166    Generator Control Module

DTC    P0A1A-658    Generator Control Module

DTC    P0A1A-791    Generator Control Module

DTC    P0A1B-198    Drive Motor "A" Control Module

DTC    P0A1B-786    Drive Motor "A" Control Module

DTC    P0A1B-794    Drive Motor "A" Control Module

DTC    P1C2A-155    Generator A/D Converter Circuit

DTC    P1C2B-192    Drive Motor "A" A/D Converter Circuit

DTC    P1C73-512    Sensor Standard Voltage "F" Circuit / Open

DTC    P1CA6-156    Generator Control Module Malfunction

DTC    P1CA7-193    Drive Motor Control Module Malfunction

DTC    P3133-659    Communication Error from Generator to Drive Motor "A"

DTC    P3134-661    Communication Error from Drive Motor "A" to Generator

for Preparation Click here


DESCRIPTION

The MG ECU located in the inverter with converter assembly monitors its internal operation and it will set DTCs when it detects malfunctions. If any of the following DTCs are output, replace the inverter with converter assembly.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P06B0
163
Sensor Power Supply "A" Circuit / Open
Inverter with converter assembly
P06D6
511
Sensor Reference Voltage "F" Circuit / Open
P06E6
164
Sensor Power Supply "C" Circuit / Open
P0A1A
151
Generator Control Module
P0A1A
166
Generator Control Module
P0A1A
658
Generator Control Module
P0A1A
791
Generator Control Module
P0A1B
198
Drive Motor "A" Control Module
P0A1B
786
Drive Motor "A" Control Module
P0A1B
794
Drive Motor "A" Control Module
P1C2A
155
Generator A/D Converter Circuit
P1C2B
192
Drive Motor "A" A/D Converter Circuit
P1C73
512
Sensor Standard Voltage "F" Circuit / Open
P1CA6
156
Generator Control Module Malfunction
P1CA7
193
Drive Motor Control Module Malfunction
P3133
659
Communication Error from Generator to Drive Motor "A"
P3134
661
Communication Error from Drive Motor "A" to Generator

INSPECTION PROCEDURE

1.REPLACE INVERTER WITH CONVERTER ASSEMBLY
(Click here)

NEXT

COMPLETED