DTC P0A94-550 DC / DC Converter Performance |
DTC P0E32-564 DC/DC Converter Voltage Sensor "A" Range / Performance |
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
| P0A94 | 550 | Boost converter overvoltage signal detection (circuit malfunction) | Inverter with converter assembly |
| P0E32 | 564 | Boost converter overvoltage signal detection (circuit malfunction (VL sensor)) |
| 1.CHECK CONNECTOR CONNECTION CONDITION (INVERTER WITH CONVERTER ASSEMBLY CONNECTOR) |
Check that the service plug grip is not installed.
Check the connector connections and contact pressure of the low voltage connectors of the inverter with converter assembly (Click here).

|
| ||||
| OK | ||
| ||