Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART ENTRY AND START SYSTEM (for Start Function)

SMART ENTRY AND START SYSTEM (for Start Function) > DIAGNOSIS SYSTEM

for Preparation Click here



DESCRIPTION
  1. Smart entry and start system (for start function) data and the Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.


CHECK DLC3
  1. Check the DLC3 (Click here).


INSPECT AUXILIARY BATTERY VOLTAGE
  1. Measure the auxiliary battery voltage.

    Standard voltage:
    11 to 14 V (power switch off)

    If the voltage is below 11 V, recharge or replace the auxiliary battery.