FRONT SHOCK ABSORBER > REMOVAL |
| 1. REMOVE FRONT WHEEL |
| 2. LOOSEN FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT |
![]() |
Loosen the front support to front shock absorber nut.
| 3. SEPARATE FRONT SPEED SENSOR |
![]() |
Remove the bolt and clamp, and separate the front speed sensor and front flexible hose from the front shock absorber assembly.
| 4. SEPARATE FRONT STABILIZER LINK ASSEMBLY |
![]() |
Remove the nut and separate the front stabilizer link assembly from the front shock absorber assembly.
If the ball joint turns together with the nut, use a wrench to hold the stud bolt.
| 5. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING |
![]() |
Support the front axle using a jack and wooden block.
| *1 | Jack |
| *2 | Wooden Block |
![]() | Front of the Vehicle |
![]() |
Remove the 2 bolts and 2 nuts, and separate the front shock absorber with coil spring (lower side) from the steering knuckle.
![]() |
Remove the 3 nuts and front shock absorber with coil spring.
| 6. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT |
![]() |
Secure SST in a vise.
![]() |
Attach the arm of SST to the diameter of the front coil spring.
| *a | Correct |
| *b | Incorrect |
Using SST, compress the front coil spring.
![]() |
Confirm that the front coil spring becomes free and remove the front support to front shock absorber nut.
| 7. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY |
| 8. REMOVE FRONT SUSPENSION SUPPORT BEARING |
| 9. REMOVE FRONT UPPER COIL SPRING SEAT |
| 10. REMOVE FRONT UPPER COIL SPRING INSULATOR |
![]() |
Disengage the front upper coil spring insulator from the front shock absorber assembly claw.
| *a | Front Upper Coil Spring Insulator |
| *b | Front Shock Absorber Assembly Claw |
Remove the front upper coil spring insulator from the front shock absorber assembly.
| 11. REMOVE FRONT COIL SPRING |
| 12. REMOVE FRONT SPRING BUMPER |
| 13. REMOVE FRONT LOWER COIL SPRING INSULATOR |
| 14. REMOVE FRONT SHOCK ABSORBER ASSEMBLY |