Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM

LIGHTING SYSTEM > OPERATION CHECK

for Preparation Click here



AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK
  1. Turn the power switch on (IG).

  2. Turn the light control switch to the AUTO position.

  3. Cover the automatic light control sensor.

  4. Check that the taillights and low beam headlights come on.

  5. Uncover the automatic light control sensor.

  6. Check that the low beam headlights and taillights go off.


LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK
  1. Close the driver door.

  2. Turn the power switch on (IG).

  3. Turn the light control switch to the tail, head or AUTO position.

  4. Turn the power switch off.

  5. Open the driver door.

  6. Check that all of the lights go off immediately.