Home › Engine / Hybrid System › 2AR-FXE ENGINE CONTROL › MASS AIR FLOW METER

MASS AIR FLOW METER > INSTALLATION

for Preparation Click here



1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY
  1. Install the mass air flow meter sub-assembly with the 2 screws.

    NOTICE:
    Make sure that the O-ring is not cracked or jammed when installing the mass air flow meter.

    HINT:
    Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly (Click here).

  1. Connect the mass air flow meter connector.