Home › Engine / Hybrid System › 2AR-FXE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > INSTALLATION

for Preparation Click here



1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    A195062E06
  1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
    Text in Illustration 
    *1
    New O-ring

  1. Install the oil control valve with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

    NOTICE:
    1. Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
    2. Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

  1. Connect the oil control valve connector.



2. INSPECT FOR OIL LEAK


3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
  1. Fit the 3 retainers and install the No. 1 engine cover sub-assembly.