Home › Engine / Hybrid System › 2AR-FXE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR

ENGINE COOLANT TEMPERATURE SENSOR > INSPECTION

for Preparation Click here



1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR



A214444E05


Text in Illustration 
*a
Component without harness connected
(Engine Coolant Temperature Sensor)
*b
Temperature °C (°F)
*c
Resistance Ω
*d
Acceptable
  1. Partially immerse the sensor in water and warm up the water.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    2.32 to 2.59 kΩ
    1 - 2
    80°C (176°F)
    0.310 to 0.326 kΩ

    NOTICE:
    When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.

    If the result is not as specified, replace the engine coolant temperature sensor.