Home
›
Engine / Hybrid System
›
HYBRID / BATTERY CONTROL
›
ACCELERATOR PEDAL SENSOR
ACCELERATOR PEDAL SENSOR > REMOVAL
for Preparation
Click here
1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY
NOTICE:
Avoid physical shock to the accelerator pedal sensor assembly.
Do not disassemble the accelerator pedal sensor assembly.
The accelerator pedal sensor assembly does not require lubrication.
Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.
Disconnect the connector.
Text in Illustration
*a
for LHD:
*b
for RHD:
Remove the 2 bolts and accelerator pedal sensor assembly.