BLOWER UNIT > INSTALLATION |
| 1. INSTALL BLOWER ASSEMBLY |
![]() |
Engage the 2 claws.
Install the blower assembly with the 2 screws.
| 2. INSTALL AIR CONDITIONING HARNESS ASSEMBLY |
![]() |
Engage the 7 clamps to install the air conditioning harness assembly.
Connect the 5 connectors.
![]() |
Install the heater packing as shown in the illustration.
| 3. INSTALL NO. 6 HEATER TO REGISTER DUCT ASSEMBLY |
![]() |
Engage the 2 claws and 2 guides to install the No. 6 heater to register duct assembly as shown in the illustration.
| 4. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY |
![]() |
Engage the guide and 2 claws to install the No. 1 air duct sub-assembly as shown in the illustration.
| 5. INSTALL AIR CONDITIONING UNIT ASSEMBLY |