Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT ASSEMBLY
(Click here)


2. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    E234641
  1. Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.



3. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY


    E227193
  1. Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.



4. REMOVE AIR CONDITIONING HARNESS ASSEMBLY


    E228072
  1. Remove the heater packing as shown in the illustration.



    E228651
  1. Disconnect the 5 connectors.

  1. Disengage 7 clamps and remove the air conditioning harness assembly.



5. REMOVE BLOWER ASSEMBLY


    E179565
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the blower assembly.