LUGGAGE COMPARTMENT DOOR > REASSEMBLY |
| 1. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH |
Engage the 2 claws to install the license plate light assembly.
Connect the connector.
| 2. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH |
| 3. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Install 5 new gaskets to the luggage compartment door outside garnish sub-assembly.
Install a new clip (back door outside garnish clip) and 2 new clips to the luggage compartment door outside garnish sub-assembly.
Engage the 3 clips to install the luggage compartment door outside garnish sub-assembly.
Install the 5 nuts.
Connect each connector.
| 4. INSTALL REAR LIGHT ASSEMBLY LH |
![]() |
Install the rear light assembly with the 4 nuts.
Engage the clamp.
Connect the connector.
| 5. INSTALL REAR LIGHT ASSEMBLY RH |
| 6. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY |
Apply MP grease to the sliding parts of the luggage compartment door lock assembly.
Engage the luggage door lock control cable sub-assembly.
![]() |
Engage the claw as shown in the illustration.
Install the luggage compartment door lock assembly with the 2 bolts.
Connect the connector.
| 7. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP |
![]() |
Install the 2 screws.
![]() |
Engage the guide and 2 claws and install the luggage compartment door assist grip.
| 8. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH |
![]() |
Engage the clip (B).
| *a | Clip (A) |
| *b | Clip (B) |
Install the luggage compartment door hinge cover LH with the 3 clips (A).
| 9. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH |
| 10. INSTALL LUGGAGE COMPARTMENT DOOR CUSHION |
![]() |
Engage the 2 claws and install 2 new luggage compartment door cushions.
| 11. INSTALL LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Install the luggage compartment door cover with the 13 clips.