Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER ACTUATOR

HEADLIGHT CLEANER ACTUATOR > INSTALLATION

for Preparation Click here


  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.


1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY


  1. Engage the guide as shown in the illustration.


    E301632E02

  1. While pushing the tab indicated by the arrow (A), engage the claw to install the headlight washer actuator sub-assembly.



    E301630
  1. Push the headlight cleaner actuator clamp as shown in the illustration.



    E301628
  1. Install the headlight cleaner clamp.

  1. Connect the headlight cleaner hose.



2. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY


    E301635
  1. Engage the claw to install the headlight washer nozzle sub-assembly.



3. INSTALL FRONT BUMPER ASSEMBLY
(Click here)