Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER

FRONT WIPER RUBBER > REPLACEMENT

for Preparation Click here



1. REMOVE FRONT WIPER BLADE


    E226640E03
  1. Pull up the holder of the front wiper blade.
    Text in Illustration 
    *a
    Holder

  1. Remove the front wiper blade from the front wiper arm as shown in the illustration.

    NOTICE:
    Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield surface.



2. REMOVE WIPER RUBBER


    E226641
  1. Remove the wiper rubber with the front wiper rubber backing plates from the front wiper blade.



    E226642
  1. Remove the 2 front wiper rubber backing plates from the wiper rubber.



3. INSTALL WIPER RUBBER


    E226643
  1. Install the 2 front wiper rubber backing plates to the wiper rubber.

    NOTICE:
    1. Align the protrusions on the wiper rubber and the notches of the backing plates.
    2. Align the curves of the backing plates and the glass.



    E226644E03
  1. Install the wiper rubber to the front wiper blade as shown in the illustration.
    Text in Illustration 
    *a
    Rear of the Wiper Blade

    NOTICE:
    Push the wiper rubber into the front wiper blade strongly to engage them securely.



4. INSTALL FRONT WIPER BLADE


    E226645E03
  1. Install the front wiper blade as shown in the illustration.

  1. Install the holder of the front wiper blade.
    Text in Illustration 
    *a
    Holder