Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR

HEADLIGHT CLEANER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

HINT:
The following check should be performed with the headlight cleaner motor and pump assembly installed to the washer jar.

  1. Fill the washer jar with washer fluid.



    E190232E09
  1. Connect a auxiliary battery positive (+) lead to terminal A51-2 of the headlight cleaner motor and pump assembly, and a auxiliary battery negative (-) lead to terminal A51-1.

  1. Check that washer fluid flows from the washer jar.

    OK:
    Washer fluid is pumped from the washer jar.

    Text in Illustration 
    *a
    Component without harness connected
    (Headlight Cleaner Motor and Pump Assembly)
    If the result is not as specified, replace the headlight cleaner motor and pump assembly.