Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM

THEFT DETERRENT SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



DATA LIST

HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body (Main Body ECU (Multiplex Network Body ECU)) 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    ACC SW
    Power switch/ON or OFF
    ON: Power switch on (ACC)
    OFF: Power switch off
    -
    IG SW
    Power switch/ON or OFF
    ON: Power switch on (IG)
    OFF: Power switch off or on (ACC)
    -
    RR Door Courtesy SW
    Rear door courtesy light switch RH/ON or OFF
    ON: Rear door RH open
    OFF: Rear door RH closed
    -
    RL Door Courtesy SW
    Rear door courtesy light switch LH/ON or OFF
    ON: Rear door LH open
    OFF: Rear door LH closed
    -
    FR Door Lock Pos
    Front door RH unlock detection switch/LOCK or UNLOCK
    LOCK: Front door RH locked
    UNLOCK: Front door RH unlocked
    -
    FR Door Courtesy
    Front door courtesy light switch RH/ON or OFF
    ON: Front door RH closed
    OFF: Front door RH open
    -
    FL Door Lock Pos
    Front door LH unlock detection switch/LOCK or UNLOCK
    LOCK: Front door LH locked
    UNLOCK: Front door LH unlocked
    -
    FL Door Courtesy
    Front door courtesy light switch LH/ON or OFF
    ON: Front door LH closed
    OFF: Front door LH open
    -
    Hood Courtesy SW
    Engine hood courtesy switch/ON or OFF
    ON: Engine hood closed
    OFF: Engine hood open
    -
    RR-Door Lock Pos SW
    Rear door RH unlock detection switch/ON or OFF
    ON: Rear door RH unlocked
    OFF: Rear door RH locked
    -
    RL-Door Lock Pos SW
    Rear door LH unlock detection switch/ON or OFF
    ON: Rear door LH unlocked
    OFF: Rear door LH locked
    -
    Luggage Courtesy SW
    Luggage compartment door courtesy switch/ON or OFF
    ON: Luggage compartment door open
    OFF: Luggage compartment door closed
    -


ACTIVE TEST

HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body or Entry & Start / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body (Main Body ECU (Multiplex Network Body ECU)) 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Vehicle Horn
    Vehicle horns
    ON / OFF
    -
    Security Horn
    Security horn
    ON / OFF
    -

    Entry & Start (Certification ECU (Smart Key ECU Assembly)) 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Immobiliser Indicator
    Security indicator light
    ON/OFF
    -