INSTRUMENT PANEL SPEAKER > INSTALLATION |
| 1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY |
Connect the connector.
![]() |
Install the front No. 2 speaker assembly with the 2 screws.
| *A | LH Side |
| *B | RH Side |
| 2. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
![]() |
Engage the 2 guides.
Engage the 3 claws and 2 clips to install the No. 1 instrument panel speaker panel sub-assembly.
| 3. INSTALL FRONT PILLAR GARNISH |
Remove the protective cover.
Make sure that the front pillar garnish clip is not damaged.
![]() |
Install the front pillar garnish clip to front pillar garnish LH.
Engage the 2 guides as shown in the illustration.
![]() |
Engage the 2 clips to install the front pillar garnish LH.
| 4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP |