Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY


2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    E235264
  1. Engage the guide and 4 clips to install the air conditioning control assembly as shown in the illustration.



3. INSTALL NO. 1 RADIO BRACKET
  1. Install the No. 1 radio bracket with the 5 screws.



4. INSTALL NO. 2 RADIO BRACKET
  1. Install the No. 2 radio bracket with the 5 screws.



5. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY
  1. Connect each connector.

  1. Engage the 6 clips to the vehicle body to temporarily install the radio receiver assembly with air conditioning control assembly.

  1. Install the radio receiver assembly with air conditioning control assembly with the 4 bolts.



6. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
  1. Connect each connector.



    B292379
  1. Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.



7. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
  1. Connect the connector.



    B281760
  1. Engage the 4 clips to install the No. 2 instrument panel register assembly.

    NOTICE:
    When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.



8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B283351
  1. Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.



9. INSTALL FRONT PANEL GARNISH RH


    B280333
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.



10. INSTALL FRONT PANEL GARNISH LH


    B281945
  1. Engage the 3 clips and 8 guides to install the front panel garnish LH.