Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR GLASS

OUTER REAR VIEW MIRROR GLASS > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE OUTER MIRROR


    B280618E01
  1. Apply protective tape to the area shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape

  1. Push the upper part of the mirror surface and tilt it.



    B280619E01
  1. Using a moulding remover, disengage the 2 claws at the lower part of the outer mirror as shown in the illustration.
    Text in Illustration 
    *1
    Moulding Remover



    B280621
  1. Disengage the 2 guides as shown in the illustration.



    B280623
  1. Disconnect the 2 connectors and remove the outer mirror.