Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


2. REMOVE ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for LHD)


    B281661E01
  1. Using a screwdriver, remove the hood lock nut cap.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



    B281667
  1. Disconnect the connector.



    B281671E01
  1. Remove the 2 bolts and hood lock bolt.
    Text in Illustration 
    *1
    Hood Lock Bolt



    B281672
  1. Disconnect the hood lock control cable assembly and remove the hood lock assembly.



3. REMOVE ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) (for RHD)


    B281669E01
  1. Using a screwdriver, remove the hood lock nut cap.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



    B281668
  1. Disconnect the connector.



    B281670E01
  1. Remove the 2 bolts and hood lock bolt.
    Text in Illustration 
    *1
    Hood Lock Bolt



    B281673
  1. Disconnect the hood lock control cable assembly and remove the hood lock assembly.