Home › Power Source / Network › 2AR-FXE BATTERY / CHARGING › AUXILIARY BATTERY

AUXILIARY BATTERY > INSTALLATION

for Preparation Click here



1. INSTALL AUXILIARY BATTERY
  1. Install the auxiliary battery.

  1. Install the auxiliary battery clamp with the bolt and nut.

    Torque:
    Nut:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
    Bolt:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the auxiliary battery hose.

    HINT:
    Push in the auxiliary battery hose to the auxiliary battery until a click sound is heard.

  1. Connect the positive (+) auxiliary battery cable with the nut.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Install the auxiliary battery terminal cover.



2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL


3. INSTALL LUGGAGE TRIM SERVICE HOLE COVER
  1. Engage the claw to connect the luggage trim service hole cover.